[j-nsp] S-NAT-IN-MX5-MX10

[Skeeve Stevens]

You all rock.. Thanks.

But it seems like a VERY expensive license for just 1:1 NAT.

Anyone got any deployment examples which would make this license worth
while?


...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/theispguy ; blog: www.theispguy.com


The Experts Who The Experts Call
Juniper - Cisco - Cloud - Consulting


On Thu, Jan 9, 2014 at 5:31 PM, Caillin Bathern <caillinb at commtelns.com>wrote:

> Yep.  S-NAT-IN-MX5-MX10 is for "inline NAT" on the Trio which is 1:1 NAT
> with no PAT.  Totally stateless.
>
> For CG-NAT variants you need an MS-MIC service card (MS-MIC-16G) which
> sits in the back of the MX80 and the correct licence JAA-NAT-1, JAA-NAT-10
> or JAA-NAT-100.
>
> Cheers,
> Caillin
>
> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of Mark Tinka
> Sent: Thursday, 9 January 2014 3:52 PM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] S-NAT-IN-MX5-MX10
>
> On Thursday, January 09, 2014 03:49:29 AM Skeeve Stevens
> wrote:
>
> > I wonder if anyone knows more about this license.
> > S-NAT-IN-MX5-MX10
> >
> > The description says: "INLINE NAT SOFTWARE LICENSE - IT ALLOWS TO RUN
> > NAT FEATURES ON A MX5 OR MX10."
> >
> > But I am not sure what that really means.  Is it for LSN/CGN?  Is it
> > needed on top of the service card?
>
> Someone will need to clarify for me here, but if this is the same inline
> NAT services you get on the bigger chassis, it will only support 1:1 NAT.
>
> Mark.
> --
> This transmission or any part of it is intended solely for the named
> addressee.  It is confidential.  The copying or distribution of this
> transmission or any information it contains, by anyone other than the
> addressee, is prohibited. CommTel Network Solutions cannot be held
> accountable for any comments, statements or attachments.
>
> If you have received this transmission in error, please phone
>   +61 3 8340 6100  or by reply e-mail to the sender.  If you are not the
> named addressee, you must destroy the original transmission and its
> contents.
>
> You may not rely on electronically transmitted material unless
> requested that the transmission is subsequently confirmed by fax or letter.
> Material transmitted to you should also be checked by reference
> to a hard copy of that material printed directly from our word processing
> system.
>
> Message  protected by MailGuard: e-mail anti-virus, anti-spam and content
> filtering.http://www.mailguard.com.au/mg
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>