[j-nsp] OSPF neig / SRX cluster / LACP

[Ben Dale]

I'm surprised that this is even working at all.

http://www.juniper.net/techpubs/en_US/junos12.2/topics/concept/interface-security-aggregated-ethernet-lacp-chassis-cluster-understanding.html

Specifically:

Note: The redundant Ethernet interface LAG child links from each node in the chassis cluster must be connected to a different LAG at the peer devices. If a single peer switch is used to terminate the redundant Ethernet interface LAG, two separate LAGs must be used in the switch.

>From a single MX a single LAG should got to a single individual node from the chassis cluster.

Can you paste the OSPF configs from each RI on the SRX and MX-B?

On 16 Jan 2014, at 2:51 pm, Samol <molasian at gmail.com> wrote:

> what i'm doing is LACP (ae) from MX to LACP (reth) SRX where one link is on Node0 and another is on node1. both link on SRX are member of Reth. 
> 
> Admin at coolSRX# show interfaces reth1  
> vlan-tagging;
> redundant-ether-options {
>     redundancy-group 1;
>     lacp {
>         passive;
>         periodic fast;
>     }
> }
> 
> {primary:node0}[edit]
> Admin at coolSRX# run show lacp interfaces reth1 
> Aggregated interface: reth1
>     LACP state:       Role   Exp   Def  Dist  Col  Syn  Aggr  Timeout  Activity
>       ge-0/0/4       Actor    No    No   Yes  Yes  Yes   Yes     Fast   Passive
>       ge-0/0/4     Partner    No    No   Yes  Yes  Yes   Yes     Fast    Active
>       ge-9/0/4       Actor    No    No   Yes  Yes  Yes   Yes     Fast   Passive
>       ge-9/0/4     Partner    No    No   Yes  Yes  Yes   Yes     Fast    Active
>     LACP protocol:        Receive State  Transmit State          Mux State 
>       ge-0/0/4                  Current   Fast periodic Collecting distributing
>       ge-9/0/4                  Current   Fast periodic Collecting distributing
> 
> All interfaces are UP. Reth's on SRX are also up. ae interfaces on MX-A and B are also UP.  
> 
> Regards,
> 
> 
> 
> 2014/1/16 Ben Dale <bdale at comlinx.com.au>
> 
> On 16 Jan 2014, at 11:22 am, Samol <molasian at gmail.com> wrote:
> >
> > I got OSPF neighbor UP for all neighbors (RI: OUTSIDE and INSIDE) but not
> > for Routing Instance (RI) INSIDE between SRX and MX-B. and If I shutdown
> > interface on SRX-B (secondary) that connecting MX, all OSPF neighbors are
> > UP.
> >
> 
> Check it in layers:
> - is the reth interface on SRX-B definitely up when you have both links enabled
> show chassis cluster interfaces
> - is your LACP up between MX-B and the cluster - bearing in mind that you cannot have a single  LAG between MX-B and your SRX (it will need to be a LAG to each cluster node)
> show lacp interfaces
> - if the neighbor is only down on one of the RIs, assuming you have a VLAN between the MX and the SRX to carry each RI - double check that the VLAN is actually tagged on both LAGs between the two boxes
> show bridge domain interface aex.0
> 
> Ben
> 
> 
> 
> -- 
> Samol Khoeurn
> (855) 077 55 64 02 / (855) 067 41 88 66
> Network Engineer 
> Cisco: CCNA/CCNP SP/CCIP/
> Juniper: JNCIA/JNCIS-ENT,SP,SEC/JNCIP-ENT
> www.linkedin.com/in/samolkhoeurn
> <OSPF on SRX clustering.png>