[j-nsp] Configure SRX as bridge for DSL connection

[matan tal]

Hey as far as I know its not possible on srx series.
I have found a configuration example for mx you can try it.
 בתאריך 11 ביול 2014 05:17, "Try Chhay" <try at eintellegonetworks.asia> כתב:

> Hi All,
>
> Let say there are two SRX110 devices such as SRX110-A and SRX110-B as the
> below setup. SRX110-A will act as bridge and SRX110-B will configure PPPoE.
> Is there any way or idea to implement DSL bridge mode on SRX?
>
> SRX110-B (fe-0/0/0)………Ethernet ……..(fe-0/0/0) SRX110-A (at-1/0/0) ………..DSL
> line………..ISP
>
> Kind regards,
> Try
> *Try Chhay - *eintellego Networks Pty Ltd
> Network Operations - Level 3 - Asia
> try at eintellegonetworks.asia ; www.eintellegonetworks.asia
> <http://www.eintellegonetworks.com/>
>
> Cell +855 (0)16 606 265 ; skype://chhaytry
>
> facebook.com/eintellegonetworks ; linkedin.com/in/trychhay
>  <http://eintellegonetworks.com/logos/ein09.png>
> The Experts Who The Experts Call
> Juniper - Cisco - Cloud
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp