[j-nsp] MX480 BNG

[Nitzan Tzelniker]

Where is your PPPoE configuration (access dynamic-profiles ...  ) ?
May be you can start with this document
http://www.juniper.net/techpubs/en_US/junos13.3/information-products/pathway-pages/subscriber-access/mpls/subscriber-management-mpls.pdf

Nitzan


On Mon, Jun 2, 2014 at 5:45 PM, Brijesh Patel <brju.patel at gmail.com> wrote:

> Hello Folks,
>
>
>
> I created multiple L2circuit over interface xe-0/0/0 MX480 and Alcatel SR
> 7750 . Status of l2circuts is UP. Attached configuration FYI pls.
>
>
>
> Now I am  trying to emulate PPoE connection over new circuit(VCID 10000
> which is up) with using of N2X tester but session is not established.
>
>
>
> Any idea or How do I troubleshoot PPOE connection ?
>
>
>
> Many Thanks,
>
>
>
> Brijesh Patel
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>