[j-nsp] mx240 - chassisd process takes whole cpu
Piotr
piotr.1234 at interia.pl
Thu Jun 19 18:31:24 EDT 2014
Hi,
Since 13:50 i have very high cpu on routing engine, router doesn't
answer for some snmp request (re cpu, interface counters are ok) but
besides this, looks good - router pass traffic. It looks like problem
with chassisd process ( nanslp ?? state). I don't see any problems with
syn flood, ntp attack or other dos. All graphs shows normal traffic.
What can be a reason of that? maybe it can be some bug in 11.4R5.5 ? I
will plan restart entire router in next service window but maybe there
is a other way to solve problem? i think about restart chassisd process
only but i'm not sure about traffic impact ?
thanks for any help.
logs from time when it began:
Jun 19 13:50:10 CHASSISD_SIGPIPE: SIGPIPE received
Jun 19 13:50:10 CHASSISD_SIGPIPE: SIGPIPE received
Jun 19 13:50:10 CHASSISD_SIGPIPE: SIGPIPE received
Jun 19 13:50:22 CHASSISD_SIGPIPE: SIGPIPE received
@MX240# run show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Election priority Master (default)
Temperature 25 degrees C / 77 degrees F
CPU temperature 25 degrees C / 77 degrees F
DRAM 8960 MB
Memory utilization 46 percent
CPU utilization:
User 53 percent
Background 7 percent
Kernel 23 percent
Interrupt 0 percent
Idle 16 percent
Model RE-S-1800x2
@MX240# run show system processes extensive
last pid: 74857; load averages: 0.91, 1.00, 1.02 up 583+10:51:40
00:02:30
139 processes: 3 running, 120 sleeping, 1 zombie, 15 waiting
Mem: 2070M Active, 181M Inact, 190M Wired, 106M Cache, 214M Buf, 4755M Free
Swap: 8192M Total, 8192M Free
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
1442 root 2 8 -88 162M 136M nanslp 200.9H 83.01% chassisd
11 root 1 171 52 0K 16K RUN ??? 11.77% idle
1481 root 1 111 15 245M 243M select 179.3H 0.00% sampled
More information about the juniper-nsp
mailing list