[j-nsp] QinQ

[Atif Saleem]

Sorry, has some typo in the previous email.

I think Dave Bell is right as on switch it is as follows:

"set vlans v305 dot1q-tunneling *customer-vlans 105"*

 So, the inner vlan must be 105 and outer vlan must be 305, but on MX it is
as below.

"
set bridge-domains VLAN-305 vlan-tags outer 105

set bridge-domains VLAN-305 vlan-tags inner 305
"

Instead it should be as below on MX.

"
set bridge-domains VLAN-305 vlan-tags *outer 305*

set bridge-domains VLAN-305 vlan-tags *inner 105*
*"*

Best,
Atif


On Thu, Mar 6, 2014 at 4:54 PM, Atif Saleem <malik.atif.saleem at gmail.com>wrote:

> I think Dave Bell is right as on switch it is as follows:
>
> "set vlans v305 dot1q-tunneling *customer-vlans 105"*
>
>  So the inner vlan must be 104 and outer vlan must be 305 but on MX it is
> as below.
>
> "
> set bridge-domains VLAN-305 vlan-tags outer 105
>
> set bridge-domains VLAN-305 vlan-tags inner 305
> "
>
> Instead it should be as below because on MX the inner-vlan is 305, not
> 105.
>
> "
> set bridge-domains VLAN-305 vlan-tags *outer 305*
>
> set bridge-domains VLAN-305 vlan-tags *inner 105*
> *"*
>
> Best,
> Atif
>
>
> On Thu, Mar 6, 2014 at 3:54 PM, Rodrigo Augusto <rodrigo at 1telecom.com.br>wrote:
>
>> You have to change mtu parameters to enable q-inq ?
>>
>> Rodrigo Augusto
>> Gestor de T.I. Grupo Connectoway
>> http://www.connectoway.com.br <http://www.connectoway.com.br/>
>> http://www.1telecom.com.br <http://www.1telecom.com.br/>
>> * rodrigo at connectoway.com.br
>> ( (81) 3366-7376
>> ( (81) 8184-3646
>> ( INOC-DBA 52965*100
>>
>>
>>
>>
>> On 06/03/14 06:23, "Mohammad Khalil" <eng.mssk at gmail.com> wrote:
>>
>> >Hi guys , can anyone assist with the above configuration ?
>> >I have tried the same with EX4200 and MX480 and did not work as well
>> >
>> >BR,
>> >Mohammad
>> >
>> >
>> >On Wed, Jun 26, 2013 at 11:20 AM, Mohammad Khalil
>> ><eng.mssk at gmail.com>wrote:
>> >
>> >> Hi and sorry for the late reply
>> >> Please find the configuration I did
>> >>
>> >> ex3200:
>> >>
>> >> ------
>> >>
>> >>
>> >>
>> >> set interfaces ge-0/0/23.0 family ethernet-switching vlan members v305
>> >>
>> >> set vlans v305 vlan-id 305
>> >>
>> >> set vlans v305 interface ge-0/0/23.0
>> >>
>> >> set vlans v305 dot1q-tunneling customer-vlans 105
>> >>
>> >>
>> >>
>> >> MX480:
>> >>
>> >> -------
>> >>
>> >> set interfaces ge-5/0/8 unit 0 family bridge vlan-id-list 305
>> >>
>> >> set bridge-domains VLAN-305 domain-type bridge
>> >>
>> >> set bridge-domains VLAN-305 vlan-tags outer 105
>> >>
>> >> set bridge-domains VLAN-305 vlan-tags inner 305
>> >>
>> >> set bridge-domains VLAN-305 routing-interface irb.305
>> >> BR,
>> >> Mohammad
>> >>
>> >>
>> >> On Tue, Jun 18, 2013 at 4:17 PM, Jared Gull <jmgull at yahoo.com> wrote:
>> >>
>> >>> Hi Mohammad,
>> >>>
>> >>> Can you share your current configurations and the topology details?
>> >>>Also,
>> >>> please explain how you're testing this and what you're seeing or not
>> >>>seeing.
>> >>>
>> >>> -Thanks,
>> >>>
>> >>> Jared
>> >>>
>> >>>  ------------------------------
>> >>>  *From:* Mohammad Khalil <eng.mssk at gmail.com>
>> >>> *To:* "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
>> >>> *Sent:* Tuesday, June 18, 2013 1:49 AM
>> >>> *Subject:* [j-nsp] QinQ
>> >>>
>> >>> Hi all , i am trying to implement QinQ between mx480 and ex4200 , does
>> >>> anyone have previous experience with that ?
>> >>>
>> >>> Thanks
>> >>> _______________________________________________
>> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> >>>
>> >>>
>> >>>
>> >>
>> >_______________________________________________
>> >juniper-nsp mailing list juniper-nsp at puck.nether.net
>> >https://puck.nether.net/mailman/listinfo/juniper-nsp
>> >
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
>
> --
> Atif
>



-- 
Atif