[j-nsp] QinQ

[Atif Saleem]

I think Dave Bell is right as on switch it is as follows:

"set vlans v305 dot1q-tunneling *customer-vlans 105"*

 So the inner vlan must be 104 and outer vlan must be 305 but on MX it is
as below.

"
set bridge-domains VLAN-305 vlan-tags outer 105

set bridge-domains VLAN-305 vlan-tags inner 305
"

Instead it should be as below because on MX the inner-vlan is 305, not 105.

"
set bridge-domains VLAN-305 vlan-tags *outer 305*

set bridge-domains VLAN-305 vlan-tags *inner 105*
*"*

Best,
Atif


On Thu, Mar 6, 2014 at 3:54 PM, Rodrigo Augusto <rodrigo at 1telecom.com.br>wrote:

> You have to change mtu parameters to enable q-inq ?
>
> Rodrigo Augusto
> Gestor de T.I. Grupo Connectoway
> http://www.connectoway.com.br <http://www.connectoway.com.br/>
> http://www.1telecom.com.br <http://www.1telecom.com.br/>
> * rodrigo at connectoway.com.br
> ( (81) 3366-7376
> ( (81) 8184-3646
> ( INOC-DBA 52965*100
>
>
>
>
> On 06/03/14 06:23, "Mohammad Khalil" <eng.mssk at gmail.com> wrote:
>
> >Hi guys , can anyone assist with the above configuration ?
> >I have tried the same with EX4200 and MX480 and did not work as well
> >
> >BR,
> >Mohammad
> >
> >
> >On Wed, Jun 26, 2013 at 11:20 AM, Mohammad Khalil
> ><eng.mssk at gmail.com>wrote:
> >
> >> Hi and sorry for the late reply
> >> Please find the configuration I did
> >>
> >> ex3200:
> >>
> >> ------
> >>
> >>
> >>
> >> set interfaces ge-0/0/23.0 family ethernet-switching vlan members v305
> >>
> >> set vlans v305 vlan-id 305
> >>
> >> set vlans v305 interface ge-0/0/23.0
> >>
> >> set vlans v305 dot1q-tunneling customer-vlans 105
> >>
> >>
> >>
> >> MX480:
> >>
> >> -------
> >>
> >> set interfaces ge-5/0/8 unit 0 family bridge vlan-id-list 305
> >>
> >> set bridge-domains VLAN-305 domain-type bridge
> >>
> >> set bridge-domains VLAN-305 vlan-tags outer 105
> >>
> >> set bridge-domains VLAN-305 vlan-tags inner 305
> >>
> >> set bridge-domains VLAN-305 routing-interface irb.305
> >> BR,
> >> Mohammad
> >>
> >>
> >> On Tue, Jun 18, 2013 at 4:17 PM, Jared Gull <jmgull at yahoo.com> wrote:
> >>
> >>> Hi Mohammad,
> >>>
> >>> Can you share your current configurations and the topology details?
> >>>Also,
> >>> please explain how you're testing this and what you're seeing or not
> >>>seeing.
> >>>
> >>> -Thanks,
> >>>
> >>> Jared
> >>>
> >>>  ------------------------------
> >>>  *From:* Mohammad Khalil <eng.mssk at gmail.com>
> >>> *To:* "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
> >>> *Sent:* Tuesday, June 18, 2013 1:49 AM
> >>> *Subject:* [j-nsp] QinQ
> >>>
> >>> Hi all , i am trying to implement QinQ between mx480 and ex4200 , does
> >>> anyone have previous experience with that ?
> >>>
> >>> Thanks
> >>> _______________________________________________
> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>>
> >>>
> >>>
> >>
> >_______________________________________________
> >juniper-nsp mailing list juniper-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Atif