[j-nsp] Disable STP on a port with ELS?

[Giuliano Cardozo Medalha]

yes on new ELS you need to declare each port

you can use the wildcard

wildcard range protocols rstp interfaces ge-0/0/[0-47]

Sent from my iPhone

> On 08/03/2014, at 20:44, Ben Dale <bdale at comlinx.com.au> wrote:
> 
> I seem to recall reading that at least on the 4300 ELS, spanning-tree is now no longer implicitly enabled on every port, so disable is no longer required because it is the default state unless you have explicitly referenced the interface.
> 
> Would love to confirm this with someone who has access to either 4300, 9200 or QFX5100 in front of them
> 
> Ben
>> On 9 Mar 2014, at 1:49 am, "Chuck Anderson" <cra at WPI.EDU> wrote:
>> 
>> Here is another Enhanced Layer 2 Software question.  Is it possible to
>> disable STP participation on a port?  The "disable" command seems to
>> be missing from these hierarchies, at least on 13.2X51 for QFX5100:
>> 
>> protocols stp interface <> disable
>> protocols rstp interface <> disable
>> protocols mstp interface <> disable
>> protocols vstp interface <> disable
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp