[j-nsp] poll physical GigE and all its VLAN sub-interfaces counters over SNMP with single SNMP GetRequest query

[Martin T]

Saku,

to be technically correct, I could poll the 32 bit counters as well in
case of short polling interval, but it's easier to poll the 64 bit
counters as I do not need to take counter roll over into
consideration.


regards,
Martin

On 5/6/14, Martin T <m4rtntns at gmail.com> wrote:
> Saku,
>
> as you mentioned in your initial letter, I should have used 64 bit
> counters:
>
> $ for i in ifDescr ifHCInOctets ifHCInUcastPkts; do snmpget -Oq -v 2c
> -c public 10.10.10.254 "$i".723; done
> IF-MIB::ifDescr.723 ge-0/0/3
> IF-MIB::ifHCInOctets.723 409375455731913
> IF-MIB::ifHCInUcastPkts.723 374757384876
> $
>
> Sorry for overlooking this. However, I'm afraid that 5 second interval
> is too long for me in this case and I'll still need to log into router
> and parse the output of CLI command.
>
>
> regards,
> Martin
>
> On 5/6/14, Saku Ytti <saku at ytti.fi> wrote:
>> On (2014-05-05 18:39 +0000), Martin T wrote:
>>
>> Hi Martin,
>>
>>> Still, ifInOctets and ifInUcastPkts differ in orders of magnitude from
>>> "Input  bytes" and "Input  packets" counter values in "show interfaces
>>> ge-0/0/3 extensive" output. Any ideas?
>>
>> Sorry no ideas, maybe JTAC time.
>>
>> --
>>   ++ytti
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>