[j-nsp] EX4550 L2Circuit/VPN to MX80/lt Interface

[Alexander Arseniev]

There is a line missing on MX side:

set interfaces  lt-0/0/0.0 family ccc

Thanks
Alex

12/11/2014 16:51, Raphael Mazelier wrote:
>
>
> Le 11/11/14 22:29, chip a écrit :
>> http://pastebin.com/YYfHk9M2
>>
>> That should get you.  *Caveats apply* but it does work =)
>>
>> --chip
>>
>
>
> Thks you chip.
>
> With your configuration I've made some progress.
> Now I've got some arp replies on the CE connected to the EX :
>
> 2.1.1.5 > 2.1.1.6: ICMP echo request, id 26654, seq 11, length 64
> 17:42:39.031721 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 
> 2.1.1.5 tell 2.1.1.6, length 46
> 17:42:39.031731 ARP, Ethernet (len 6), IPv4 (len 4), Reply 2.1.1.5 
> is-at 78:2b:cb:28:2d:55, length 28
>
> The lt mac is correctly learn on the CE.
> But for one reason or another the mac address of the ce is not learn 
> on the mx80 side ?!
>
>
> I'm just out of luck for this setup :(
>
>