[j-nsp] EX4550 L2Circuit/VPN to MX80/lt Interface

[Eduardo Schoedler]

There's no need to run "protocols ldp" ?

--
Eduardo Schoedler

2014-11-12 17:18 GMT-02:00 Alexander Arseniev <arseniev at btinternet.com>:
> There is a line missing on MX side:
>
> set interfaces  lt-0/0/0.0 family ccc
>
> Thanks
> Alex
>
> 12/11/2014 16:51, Raphael Mazelier wrote:
>>
>>
>>
>> Le 11/11/14 22:29, chip a écrit :
>>>
>>> http://pastebin.com/YYfHk9M2
>>>
>>> That should get you.  *Caveats apply* but it does work =)
>>>
>>> --chip
>>>
>>
>>
>> Thks you chip.
>>
>> With your configuration I've made some progress.
>> Now I've got some arp replies on the CE connected to the EX :
>>
>> 2.1.1.5 > 2.1.1.6: ICMP echo request, id 26654, seq 11, length 64
>> 17:42:39.031721 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has
>> 2.1.1.5 tell 2.1.1.6, length 46
>> 17:42:39.031731 ARP, Ethernet (len 6), IPv4 (len 4), Reply 2.1.1.5 is-at
>> 78:2b:cb:28:2d:55, length 28
>>
>> The lt mac is correctly learn on the CE.
>> But for one reason or another the mac address of the ce is not learn on
>> the mx80 side ?!
>>
>>
>> I'm just out of luck for this setup :(
>>
>>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



-- 
Eduardo Schoedler