[j-nsp] Cosmetic bug? - mx80 12.2r7.7

[Fabien DEDENON]

Le 04/09/2014 14:02, Darren O'Connor a écrit :
> Yes my bad. 12.3R7.7
>
> Still shows the same. No issues forwarding traffic:
>
> root at mx80> show chassis tfeb
> TFEB status:
> Slot 0 information:
>   State                                 Online
>   Intake temperature                 42 degrees C / 107 degrees F
>   Exhaust temperature                58 degrees C / 136 degrees F
>   CPU utilization                   100 percent
>   Interrupt utilization               7 percent
>   Heap utilization                   18 percent
>   Buffer utilization                 13 percent
>   Total CPU DRAM                   1024 MB
>   Start time:                           2014-08-26 07:22:59 BST
>   Uptime:                               9 days, 5 hours, 40 minutes, 29 seconds
>
> Thanks
> Darren
> http://www.mellowd.co.uk/ccie
>
>
Hi,

If inline jflow is activated you probably hit PR671136
"With Junos 12.3R7, high CPU utilization (100%) will be seen on MPC if
inline sampling/Jflow is enabled. The high CPU will affect the MPC's
normal tasks.
To restore service, try to disable inline sampling/Jflow and then
restart affected FPC or whole chassis."

12.3R7-S2 is already correcting this behaviour since early august, and
12.3R8 also taking this in charge had a target realease date on 2 sept .. :)

++

Fabien