[j-nsp] EX9200 DHCP Relay

[chris at sdnessentials.com]

1) 13.2R5.10 (latest recommended)
2) Nope
 


Chris Jones, JNCIE-ENT #272 / JNCIP-SP
SDN Engineer
www.sdnessentials.com
Cell: 858-888-0373
E-Mail: chris at sdnessentials.com 

 
 
--------- Original Message --------- Subject: Re: [j-nsp] EX9200 DHCP Relay
From: "Will O'Brien" <will.obrien at noaa.gov>
Date: 9/16/14 8:03 am
To: chris at sdnessentials.com
Cc: juniper-nsp at puck.nether.net

1) are you running 13.3?
 2) are you using a routing instance?
 
 On Sep 16, 2014, at 8:02 AM, chris at sdnessentials.com wrote:
 
 > Juniper Geniuses,
 > 
 > I'm trying to set up some basic DHCP relay on an EX9200. The CLI rejects the "forwarding-options bootp" syntax, saying "unsupported platform". 
 > 
 > Googling for some documentation, I came across "DHCP Relay Minimum Configuration":
 > 
 > http://www.juniper.net/techpubs/en_US/junos13.3/topics/example/dhcp-subscriber-access-dhcp-relay-minimum-configuration.html
 > 
 > Now, while I've come to understand that this DHCP Relay configuration was specifically meant to be for MX subscriber management, this particular page happens to be under the EX9200 documentation (I also realize the EX9200 is basically an MX). I've also read that it's kind of buggy (or was in 2012...). I also tried labbing this using some Fireflies and a VMX in Junosphere but couldn't get it working. 
 > 
 > Anybody out there know if this is the correct way to do DHCP relaying on an EX9200? If not, could somebody please provide a config example of how to do this?
 > 
 > Regards,
 > 
 > Chris
 > 
 > 
 > Chris Jones, JNCIE-ENT #272 / JNCIP-SP
 > SDN Engineer
 > www.sdnessentials.com
 > Cell: 858-888-0373
 > E-Mail: chris at sdnessentials.com
 > _______________________________________________
 > juniper-nsp mailing list juniper-nsp at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/juniper-nsp