[j-nsp] Egress policer on EX3300

[Mike Gonnason]

What version are you running?

Have you examined:
http://www.juniper.net/documentation/en_US/release-independent/junos/topics/concept/ex-series-software-features-overview.html


On Tue, Sep 23, 2014 at 1:10 PM, Robert Hass <robhass at gmail.com> wrote:

> Hi
> Is egress policing or shaping supported on EX3300 platform ?
>
> I tried to configure policing 2Mbps for port ge-0/0/0, but receiving error
> at commit:
>
>     Referenced filter 'Police-2M' can not be used as policer not supported
> on egress
> error: configuration check-out failed
>
> Input filters commiting & works without problems.
>
> My config:
>
> interfaces {
>     ge-0/0/0 {
>         unit 0 {
>             family ethernet-switching {
>                 filter {
>                     input Police-2M;
>                     output Police-2M;
>                 }
>             }
>         }
>     }
> }
> firewall {
>     family ethernet-switching {
>         filter Police-2M {
>             term Default {
>                 then policer 2Mbps;
>             }
>         }
>     }
>     policer 2Mbps {
>         if-exceeding {
>             bandwidth-limit 2m;
>             burst-size-limit 100k;
>         }
>         then discard;
>     }
> }
>
>
> Rob
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>