[j-nsp] mx80 napt-44 with ms-mic on 13.2R5

[ryanL]

has anyone been successful here? i'm getting the following error, even
though juniper's docs seem to indicate this is supported on the ms-mic with
13.2.

my ref guides are:
http://www.juniper.net/techpubs/en_US/junos13.2/information-products/topic-collections/config-guide-services/index.html?features-ms-mic.html
http://www.juniper.net/techpubs/en_US/junos13.2/topics/example/nat-nat44-config-ms-mpc.html

ry at iad1-er2# show | compare
[edit]
+  services {
+      service-set SSET1 {
+          nat-rules NAT-RULE1;
+          interface-service {
+              service-interface ms-0/2/0;
+          }
+      }
+      nat {
+          pool NP2 {
+              address <pub_space>/28;
+              port {
+                  automatic;
+              }
+          }
+          rule NAT-RULE1 {
+              match-direction input;
+              term term-1 {
+                  from {
+                      source-address {
+                          10.0.0.0/8;
+                      }
+                      destination-address {
+                          10.0.0.0/8;
+                      }
+                  }
+                  then {
+                      no-translation;
+                  }
+              }
+              term term-2 {
+                  from {
+                      source-address {
+                          10.0.0.0/8;
+                      }
+                  }
+                  then {
+                      translated {
+                          source-pool NP2;
+                          translation-type {
+                              napt-44;
+                          }
+                      }
+                  }
+              }
+          }
+      }
+  }
[edit interfaces]
+   ms-0/2/0 {
+       unit 0 {
+           family inet;
+       }
+   }

[edit]
ry at iad1-er2# commit check
[edit services]
  'service-set SSET1'
    translation type not supported on ms-interface
error: configuration check-out failed

[edit]