[j-nsp] EX4200 VC Cabling

[Skeeve Stevens]

Awesome.. thanks.


...Skeeve

*Skeeve Stevens - *eintellego Networks Pty Ltd
skeeve at eintellegonetworks.com ; www.eintellegonetworks.com

Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/theispguy ; blog: www.theispguy.com


The Experts Who The Experts Call
Juniper - Cisco - Cloud - Consulting - IPv4 Brokering

On 1 October 2014 09:33, Ben Dale <bdale at comlinx.com.au> wrote:

> I've never had any issues doing it either way.  It'll auto-detect the
> topology, even if you have only a single link.
>
> What I have seen though is a bunch of units (at least a couple of months
> back) coming out of the factory booting form the backup image (like the
> build image was corrupt), so it may have nothing to do with your VC build
> at all.
>
> Just upgrade to JTAC preferred, snapshot all members (and read a long
> novel while you wait for that to finish) and then reboot the whole chassis.
>
>
> On 1 Oct 2014, at 9:23 am, Skeeve Stevens <
> skeeve+junipernsp at eintellegonetworks.com> wrote:
>
> > Hi all,
> >
> > We're doing a bunch of 2 x EX4200 in VC.
> >
> > Once we connect the VC cables, one of the Junos seems to be corrupted.
> >
> > We're currently using the ring X cabling.. but I have seen another option
> > for a 2 member stack of | |
> >
> > Anyone got any thoughts?
> >
> > *********************************************************************
> > **                                                                   **
> > **  WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE      **
> > **                                                                   **
> > **  It is possible that the primary copy of JUNOS failed to boot up  **
> > **  properly, and so this device has booted from the backup copy.    **
> > **                                                                   **
> > **  Please re-install JUNOS to recover the primary copy in case      **
> > **  it has been corrupted and if auto-snapshot feature is not        **
> > **  enabled.                                                         **
> > **
> >
> > ...Skeeve
> >
> > *Skeeve Stevens - *eintellego Networks Pty Ltd
> > skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
> >
> > Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
> >
> > facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
> > linkedin.com/in/skeeve
> >
> > twitter.com/theispguy ; blog: www.theispguy.com
> >
> >
> > The Experts Who The Experts Call
> > Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>