[j-nsp] EX4200 VC Cabling

[Mike Gonnason]

I have 4 VC stacks of 2x EX4200 in X ring, with no issues. I am running
 11.4R1, 11.4R2, 11.4R5, (they have deployed overtime, and have not had a
reason to schedule downtime yet).

Some are auto-config, others are pre-provisioned.

-Mike Gonnason

On Tue, Sep 30, 2014 at 5:01 PM, Skeeve Stevens <
skeeve+junipernsp at eintellegonetworks.com> wrote:

> Awesome.. thanks.
>
>
> ...Skeeve
>
> *Skeeve Stevens - *eintellego Networks Pty Ltd
> skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
>
> Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
> linkedin.com/in/skeeve
>
> twitter.com/theispguy ; blog: www.theispguy.com
>
>
> The Experts Who The Experts Call
> Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
>
> On 1 October 2014 09:33, Ben Dale <bdale at comlinx.com.au> wrote:
>
> > I've never had any issues doing it either way.  It'll auto-detect the
> > topology, even if you have only a single link.
> >
> > What I have seen though is a bunch of units (at least a couple of months
> > back) coming out of the factory booting form the backup image (like the
> > build image was corrupt), so it may have nothing to do with your VC build
> > at all.
> >
> > Just upgrade to JTAC preferred, snapshot all members (and read a long
> > novel while you wait for that to finish) and then reboot the whole
> chassis.
> >
> >
> > On 1 Oct 2014, at 9:23 am, Skeeve Stevens <
> > skeeve+junipernsp at eintellegonetworks.com> wrote:
> >
> > > Hi all,
> > >
> > > We're doing a bunch of 2 x EX4200 in VC.
> > >
> > > Once we connect the VC cables, one of the Junos seems to be corrupted.
> > >
> > > We're currently using the ring X cabling.. but I have seen another
> option
> > > for a 2 member stack of | |
> > >
> > > Anyone got any thoughts?
> > >
> > > *********************************************************************
> > > **                                                                   **
> > > **  WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE      **
> > > **                                                                   **
> > > **  It is possible that the primary copy of JUNOS failed to boot up  **
> > > **  properly, and so this device has booted from the backup copy.    **
> > > **                                                                   **
> > > **  Please re-install JUNOS to recover the primary copy in case      **
> > > **  it has been corrupted and if auto-snapshot feature is not        **
> > > **  enabled.                                                         **
> > > **
> > >
> > > ...Skeeve
> > >
> > > *Skeeve Stevens - *eintellego Networks Pty Ltd
> > > skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
> > >
> > > Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
> > >
> > > facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
> > > linkedin.com/in/skeeve
> > >
> > > twitter.com/theispguy ; blog: www.theispguy.com
> > >
> > >
> > > The Experts Who The Experts Call
> > > Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>