[j-nsp] Aggregate policer config

Peter Ehiwe peterehiwe at gmail.com
Wed Apr 8 08:39:05 EDT 2015


have you considered writing an event script for this  ?

On Tue, Apr 7, 2015 at 10:15 PM, Matthew Crocker
<matthew at corp.crocker.com> wrote:
>
> Hello,
>
>  A customer with two connections to my mx240.  I want to police their total bandwidth to 800mbps. Right now I have a 800mbps policer but that gives them 800mbps on each circuit.
>
> Customer Interface 1 is a VLAN on a 10G interface
> Customer Interface 2 is a VLAN on a 1G interface
>
> Each interface has its own /30 IP subnet with a  BGP session on each customer IP
>
> Customer buys X bandwidth we want to give them X bandwidth over a pair of circuits.  If one circuit goes down the policer needs to be set to the X bandwidth the purchased.
>
> Thanks
>
> -Matt
>
> --
> Matthew S. Crocker
> President
> Crocker Communications, Inc.
> PO BOX 710
> Greenfield, MA 01302-0710
>
> E: matthew at crocker.com
> P: (413) 746-2760
> F: (413) 746-3704
> W: http://www.crocker.com
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list