[j-nsp] Problem with ether-type changing on QFX3500 VC

[Olivier Benghozi]

Hi Andrew,

according to
http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/getting-started-els.html <http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/getting-started-els.html>
you have to use some ether-options ethernet-switch-profile tag-protocol-id, under the interface...


Olivier


> Le 14 avr. 2015 à 15:42, Andrew Osnach <andrew at osnach.kiev.ua> a écrit :
> 
> Hello,
> 
> I've got two QFX3500 in a virtual chassis with JunOS 13.2X51-D30.4.
> 
> I've upgraded from a standalone QFX3500 with JunOS 12.3X50-D30.2 where I've got this statement:
> 
> ethernet-switching-options {
>    dot1q-tunneling {
>        ether-type 0x8100;
>    }
> }
> 
> But after upgrading to 13.2 there's no even stanza ethernet-switching-options in the configuration mode, although there's a link in the documentation about it (http://www.juniper.net/techpubs/en_US/junos13.2/topics/reference/configuration-statement/ethernet-switching-options-qfx-series.html).
> 
> How can I change ether-type in JunOS 13.2?
> 
> Thanks in advance.