[j-nsp] vpls question
james list
jameslist72 at gmail.com
Fri Apr 24 07:23:19 EDT 2015
I have a VPLS multi-homed environment with two MX routers (PE1 and PE2)
connected to a single ethernet switch (CE1). I have PE1 configured with
site-preference as "primary" and PE2 as "backup".
Behind the CE1 there is a router running OSPF with both MX (on irb
interface).
My goal is to have:
1) Multihoming to prevent loops
2) Let the router run two OSPF neighbor with both PE and not just one
with the primary PE.
I’m wondering if using:
set routing-instances XXXX protocols vpls connectivity-type irb
instead of the default (connectivity-type ce) could give me the option to
reach my goal number 2) and if I can introduce any drawback.
Or if there is another solution keeping 1).
I don’t have a lab to test…
Any help/feedback is really appreciated.
Greetings
James
More information about the juniper-nsp
mailing list