[j-nsp] Breaking an EX cluster?

[Scott Granados]

I tried this one and it errors out because the node was active.

Thanks
Scott

> On Aug 13, 2015, at 9:34 PM, Giuliano (WZTECH) <giuliano at wztech.com.br> wrote:
> 
> Request virtual-chassis recycle and renumber you can put the switch as a master stand alone
> 
> Sent from my iPhone
> 
>> On Aug 13, 2015, at 22:23, Scott Granados <scott at granados-llc.net> wrote:
>> 
>> Hi,
>> Have some EX 4300s that I want to break apart and start like they were factory new and reboot.  I know about the factory default button on the front and the configuration option but no matter how I apply that I still have the node boot thinking it’s a member of the previous chassis.  How do I delete it’s membership when it’s active / a stand alone node?
>> 
>> Any pointers are most appreciated.
>> 
>> Thank you
>> Scott
>> 
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp