[j-nsp] Breaking an EX cluster?

Giuliano (WZTECH) giuliano at wztech.com.br
Thu Aug 13 22:29:46 EDT 2015


Have you tried to remove the vc-ports ?

Sent from my iPhone

> On Aug 13, 2015, at 23:19, Scott Granados <scott at granados-llc.net> wrote:
> 
> I tried this one and it errors out because the node was active.
> 
> Thanks
> Scott
> 
>> On Aug 13, 2015, at 9:34 PM, Giuliano (WZTECH) <giuliano at wztech.com.br> wrote:
>> 
>> Request virtual-chassis recycle and renumber you can put the switch as a master stand alone
>> 
>> Sent from my iPhone
>> 
>>> On Aug 13, 2015, at 22:23, Scott Granados <scott at granados-llc.net> wrote:
>>> 
>>> Hi,
>>> Have some EX 4300s that I want to break apart and start like they were factory new and reboot.  I know about the factory default button on the front and the configuration option but no matter how I apply that I still have the node boot thinking it’s a member of the previous chassis.  How do I delete it’s membership when it’s active / a stand alone node?
>>> 
>>> Any pointers are most appreciated.
>>> 
>>> Thank you
>>> Scott
>>> 
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


More information about the juniper-nsp mailing list