[j-nsp] Collapsed MPLS CE/PE/P configuration

[Phil Mayers]

On 21/12/15 15:42, Matthew Crocker wrote:

> A ‘show run bgp sum’    bgp.l3vpn.0  with 0 routes

That's what you want to focus on. Check the output of "show bgp nei" to 
ensure the inet-vpn-unicast is *actually* present on "NLRI for this 
session"; if not then correct this.

Remember if you're using a route-reflector you need to have it setup there.

If the NLRI is present then "show route receive-proto bgp <nei> table 
bgp.l3vpn.0 all extensive" to check you're actually getting any routes 
but maybe rejecting them.

If there are no routes present, check "show route advertising-protocol 
bgp <nei> table VRF.inet.0" at the sending side to check they're 
actually being redistributed.

Showing your full BGP config might help.