[j-nsp] MX80 Sampling - High CPU

[Masood Ahmad Shah]

Jordan,

How does CPU utilization looks during these 3 minutes (even a minute before
and after)?
How many routes (prefixes) you have in the RIB (not just active, the total
number of prefixes that are being scanned to find out the best routes
"adj-in-rib")?
With 14.1R3.5, did you use rpd-64bit or 32bit?

Cheers,
Masood

On Sun, Jan 4, 2015 at 9:30 AM, Jordan Whited <jwhited0917 at gmail.com> wrote:

> I don't have any issues when sampling is disabled.
>
> No improvement from what I can tell between 12.3R8.7 and 14.1R3.5. Still
> seeing active-paths in the RIB advertised to other neighbors for upwards of
> 3 minutes before they are installed in the FIB.
>
> On Sat, Dec 13, 2014 at 3:34 AM, MSusiva <ssiva1086 at gmail.com> wrote:
>
> > I assume, the 3mins result is with sampling?
> > What is the result without sampling?
> > Did you test in 14.1 with sampling?
> >
> > Thank You
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>