[j-nsp] Experience with QFX5100 13.2 & 14.1

[Darren O'Connor]

We are currently using QFX5100s for a new deployment.
VCF, l2, mstp, ospf, bgp, lacp
There are a number of bugs. Most are getting fixed. I'm currently running the absolute latest version simply to get the fixes I need.
The biggest issue at the moment is that the QFX boots with all ports UP, even though it can't yet forward packets. This is a big issue where attached servers are dual connected and use link -state to determine which port to send on. This is not a Junos bug, as Junos isn't loaded until much later in the boot sequence. I have been told a boot fix is on it's way before the end of this month.
Darren
> From: richih.mailinglist at gmail.com
> Date: Thu, 15 Jan 2015 10:30:54 +0100
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Experience with QFX5100 13.2 & 14.1
> 
> Dear all,
> 
> I was wondering what experience, if any, you have had with QFX5100.
> 
> Of special interest would be what JunOS version you are running, what
> features you have enabled, and if you consider them production-ready.
> 
> 
> This question is open-ended on purpose.
> 
> 
> Thanks,
> Richard
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp