[j-nsp] Replacement HD/SSD for RE-850

[Tom Storey]

I wonder if some double sided tape would suffice to hold it in place
until it needed to be replaced?

On 25 July 2015 at 00:13, Markus <universe at truemetal.org> wrote:
> Am 23.07.2015 um 15:26 schrieb Colin Baker:
>>
>> Recently had a hard drive fail on one of our RE-850 in an M7i.  Does
>> anyone have a known working (preferably SSD) replacement they can
>> recommend?  I seem to remember something on juniper.cluepon.net that
>> certain models don't fit on the RE board all that well, but the site has
>> been down for awhile now.
>
>
> A few weeks ago I used Transcend TS32GPSD330 but these newer Transcend
> thingies still cannot get mounted properly and the result looks like this:
>
> http://truemetal.org/universe/blog/2013/03/upgrading-juniper-re-5-0-re-400-to-ssd/
>
> Oh well, it was just a backup.
>
> I've also used KingSpec KSD-PA25.1-032MJ 32 GB in 2013 and KingSpec
> KSD-PA25.6-032SS 32 GB (MLC) in 2014 and these work fine. E.g.
> http://www.amazon.de/dp/B0047U977G - but it's MLC.
>
> With the KingSpecs you need to set the jumper to cable select or there'll be
> problems.
>
> Good luck.
>
> PS: Sad to see cluepon is down. Why?
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp