[j-nsp] Multiple policers for interface/units

[Arie Vayner]

Chris,

You should actually shape to 500Mbps and not police your traffic...
I think this could be a good start:
http://www.juniper.net/techpubs/en_US/junose15.1/information-products/topic-collections/qos-configuration/index.html?book-swconfig-qos-configuration.html

Arie

On Tue, Jun 2, 2015 at 1:15 PM, Chris Adams <cma at cmadams.net> wrote:

> I have used policers on units to limit the traffic for a particular
> VLAN, but now I have a need to limit the total traffic on an interface.
> I have a gigE link that is telco-limited to 500Mbps (but I need to
> police the link so I don't put more than 500M in), with several VLANs
> that each need to have their own rate.
>
> I haven't done that before; what's the best way to do that?
>
> This is on an MX960.
> --
> Chris Adams <cma at cmadams.net>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>