[j-nsp] Multiple policers for interface/units

[Chris Adams]

I have used policers on units to limit the traffic for a particular
VLAN, but now I have a need to limit the total traffic on an interface.
I have a gigE link that is telco-limited to 500Mbps (but I need to
police the link so I don't put more than 500M in), with several VLANs
that each need to have their own rate.

I haven't done that before; what's the best way to do that?

This is on an MX960.
-- 
Chris Adams <cma at cmadams.net>