[j-nsp] Juniper EX4550 load balancing of MPLS traffic

Raphael Mazelier raph at futomaki.net
Wed Jun 3 10:48:25 EDT 2015



Le 03/06/15 16:38, Mark Tinka a écrit :
>
>
> Yes, this is for Layer 2 traffic over native or LAG links.
>
> ECMP traffic would assume you're running IP/MPLS on the EX4550. Never
> ran IP/MPLS on the EX switches, so can't tell you.
>

As I already mentionned here EX can do MPLS but have a lot of 
limitation. So if you plan to use EX as P router I advice to carefuly 
test/stage it. afaik ecmp is not supported on EX.

-- 
Raphael Mazelier


More information about the juniper-nsp mailing list