[j-nsp] Setting CoS bits on ingress frames

Alexander Arseniev arseniev at btinternet.com
Wed Jun 17 10:34:14 EDT 2015


Hello,


On 17/06/2015 15:10, Victor Sudakov wrote:
> All right, if I have Internet traffic in VLAN10 and video cameras in 
> VLAN20, how do I mark on egress frames belonging to VLAN20 with CoS=1 
> and those belonging to VLAN20 with CoS=4 ? 
If You are doing it on EX-series, ingress interface is untagged, and 
egress interface is tagged, then assign FC to the ingress interface, 
then configure 802.1p rewrite rule and attach it to this FC.
Thanks
Alex


More information about the juniper-nsp mailing list