[j-nsp] Setting CoS bits on ingress frames

[Victor Sudakov]

Alexander Arseniev wrote:
> 
> 
> On 17/06/2015 15:10, Victor Sudakov wrote:
> > All right, if I have Internet traffic in VLAN10 and video cameras in 
> > VLAN20, how do I mark on egress frames belonging to VLAN20 with CoS=1 
> > and those belonging to VLAN20 with CoS=4 ? 
> If You are doing it on EX-series, ingress interface is untagged, and 
> egress interface is tagged, 

Correct.

> then assign FC to the ingress interface, 
> then configure 802.1p rewrite rule and attach it to this FC.

Would you care to give a simple example?

-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
sip:sudakov at sibptus.tomsk.ru