[j-nsp] Activating FPC's on an EX8208

[Pete Ashdown]

Might be power.  I've got two 208V's lit. Awaiting electrician on the
rest.  Doing the request says the FPC is in transition.


On 03/04/2015 09:17 AM, Iftikhar Ahmed wrote:
> How many power supplies you have in the box?
> Did you try "request chassis fpc slot X online"
> Do you see any error in log messages?
>
>
> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Pete Ashdown
> Sent: Wednesday, March 04, 2015 8:12 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Activating FPC's on an EX8208
>
> I just purchased a used EX8208 due to the fact that my EX4550's don't handle IPv6 filtering on vlans.  Now I'm having trouble getting the
> EX8208 to recognize any of its FPCs.   "Show chassis hardware" and "show
> chassis fpc" don't have anything in them at all and the ON LED on each card isn't lit, even though I have "set chassis fpc N power on" for each of them.  I am planning to buy a service contract if I can actually get the box in service, but I've sort of got a chicken-and-the-egg problem here.
>
> Any help is appreciated.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
>