[j-nsp] Activating FPC's on an EX8208

[Pete Ashdown]

A quick followup.  It wasn't the power after all.  Two 220V lines is
sufficient to power an EX8208.  It was the chassis had been previously
part of a virtual-chassis and "zeroize" didn't remove that.  I had to
"set chassis virtual-chassis disable" for it to manage itself.

On 03/04/2015 09:24 AM, Pete Ashdown wrote:
> Might be power.  I've got two 208V's lit. Awaiting electrician on the
> rest.  Doing the request says the FPC is in transition.
>