[j-nsp] MPLS EX4550

[Giuliano (WZTECH)]

We have a situation here and we find a way ... We connect 2 interfaces in a optical cable loop ... One that came from a trunk interface ... Family ethernet-switching and other family mpls with L2-circuit to do a vlan traffic to enter in a mpls interface

Sent from my iPhone

> On Mar 6, 2015, at 17:51, Levi Pederson <levipederson at mankatonetworks.net> wrote:
> 
> All,
> 
> I've got a simple MPLS setup with 4 EX4550's.
> 
> They are currently in an incomplete ring but will soon have a full ring
> situation.
> 
> I've currently got 3 circuits on the transport working wonderfully.
> However I'm trying to add another alas I'm a bit confused as how to proceed.
> 
> Previous other circuits were easier in the fact they were simply saying the
> port on MPLS1-1 is equivalent to this port on MPLS 3-1.
> 
> The new circuit is different in that I have to take a VLAN recieved on a
> trunk port and send it through the MPLS network to 3-1 and then into a
> vlan-tagged MX-10.
> 
> I was wondering if anyone has attempted this and has any pointers.
> 
> Thank you,
> 
> *Levi Pederson*
> Mankato Networks LLC
> cell | 612.481.0769
> work | 612.787.7392
> levipederson at mankatonetworks.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp