[j-nsp] Recommended Junos version for EX-4500 virtual chassis

[Scott Granados]

Ok, I’m running 13.2X51-D26.2 now and can’t find out much about this code other than that’s what was installed when they shipped the units.

I’m thinking going to the recommended version makes the most sense.  Thank you and the others who have responded, most helpful.

On Mar 19, 2015, at 9:09 AM, Tore Anderson <tore at fud.no<mailto:tore at fud.no>> wrote:

* Scott Granados <scott at granados-llc.net<mailto:scott at granados-llc.net>>

Hi, I’m wondering what people recommend for a software release for
the EX 4500 switch in a virtual chassis configuration.  I noted that
there is 13.2 code installed in my cluster now but the recommended
version on the web site is 12.3R8 which obviously doesn’t match.
What are people using and or how should I reconcile the difference
and find the right train to follow?  Any pointers would be most
appreciated.

We've got a couple of dual-node EX4500 VCs on 12.3R8. We've had only
one issue, a single port whose SFP turns off the Tx laser when the
interface is enabled and vice versa (see the thread I started on the
6th of March). No idea if it is due to a JUNOS bug though or if it is
fixed in another version.

Tore