[j-nsp] info VC QFX

[Paris Arau]

This is not applicable on QFX VC.


Thanks,
Paris

On 25/03/15 10:20, "Tore Anderson" <tore at fud.no> wrote:

>* james list <jameslist72 at gmail.com>
>
>> on QFX VC is there a way to configure VME interface to respond on each
>> module of the VC instead to be redirected on the master RE ?
>> 
>> If yes a little configuration example is appreciated.
>
>I haven't tried QFX, but on EX you can use apply-groups to match
>individual members in the VC, and set up different addressing on each
>member's "me0" interface (note: you will *not* be using "vme").
>
>See http://kb.juniper.net/InfoCenter/index?page=content&id=KB15556
>
>Try it and let the list know if it works on QFX too?
>
>Tore
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp