[j-nsp] SRX VPN in Virtual Router

[M Abdeljawad]

Hi All
I have a question about SRX VPN support under virtual router;There are two WAN links and each link member in different Virtual Router (not inet0), and the VPN tunnels must be established from both virtual routers

 

Per to my search I found two conflict results as below;

 

Below KB link mention that its supported, and the st0interface and the IKE listener interface can be assigned to the custom virtualrouter.

http://kb.juniper.net/InfoCenter/index?page=content&id=KB21487

 

 

And below document link mention that the IKE listener mustbe member of inet.0 for the VPN to work.

http://www.juniper.net/documentation/en_US/junos11.4/topics/concept/virtual-router-support-for-route-based-vpns.html

 

 

What if I used Lo0 interface and assigned it to inet.0 andused it as the external VPN interface, is this valid solution?


RegardsMahmoud