[j-nsp] Distributed PPM and LACP always goes into Queue 3. host-outbound-traffic knob has no effect -- bug?

[Masood Ahmad Shah]

AFAIK host-outbound configuration or lo0 output filter will NOT influence
the PFE generated traffic. Only the output interface filter can match the
PFE generated traffic.

Cheers,
Masood

On Fri, May 15, 2015 at 10:22 AM, Huan Pham <drie.huanpham at gmail.com> wrote:

> Hi list,
>
> I've tested in the lab and confirm that distributed PPM (e.g. one hop BFD)
> and LACP on MX does not honour host-outbound-traffic class of service nor
> outbound RE-reclassificaiton filter. This traffic always gets into queue 3.
> Depending on your design, this behaviour could be a problem, especially if
> your queue 3 is not designed for critical traffic.
> Is is a bug? Is there any way to move this control traffic to a different
> queue?
>
> Thanks very much in advance.
>
> Huan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>