[j-nsp] Child process error message

[thiyagarajan b]

Again the issue occurs. Finding the flowd_hm process is high and router is
consuming lot of memory.

rt at FAZJ2320R-1> show system processes extensive
last pid:  2625;  load averages:  0.19,  0.18,  0.17  up 0+06:20:14
 20:08:08
123 processes: 4 running, 102 sleeping, 17 waiting

Mem: 222M Active, 96M Inact, 570M Wired, 72M Cache, 69M Buf, 32M Free
Swap:


  PID USERNAME  THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
   11 root        1 171   52     0K    12K RUN    254:41 83.11% idle
 1183 root        1 103    0   638M   459M RUN     88:05 12.99% flowd_hm
 1201 root        1   4    0   101M 81228K kqread  17:34  0.05% rpd
   12 root        1 -40 -159     0K    12K WAIT     2:17  0.00% swi2: net
   13 root        1 -20 -139     0K    12K RUN      2:13  0.00% swi7: clock
sio
  931 root        1  96    0  4680K  2876K select   1:53  0.00% eventd


Running junos 11.4R10.3.

Warm Regards,
Thiyagarajan B



On Tue, Jul 15, 2014 at 8:13 PM, thiyagarajan b <bn.thiyagarajan at gmail.com>
wrote:

> Hi Abhi, Junos upgrade was done two weeks back and now suddenly it
> throws,error like this. Moreover I have upgraded the RAM to 1G before
> upgrading.
> I have lost the access, I would check the command output and respond.
>
>
> Warm regards,
> Thiyagarajan B.
>
>
> On Tue, Jul 15, 2014 at 8:02 PM, Abhi <vyaaghrah-eng at yahoo.com> wrote:
>
>> doesnt look like hardware nothing special on the j-series just pc
>> motherboard. Did you check your router is using more memory after upgrade.
>> Check the swap space under "run show system process extensive"
>>
>> regards
>> abhijeet.c
>>
>>
>>   On Tuesday, July 15, 2014 7:57 PM, thiyagarajan b <
>> bn.thiyagarajan at gmail.com> wrote:
>>
>>
>>
>> Thanks Abhi for your prompt response, I tried rebooting the device twice
>> but no positive result, this device was running in junos9.0 and recently
>> upgrade to 11.4. Would you suspect any bug or something, or its a hardware
>> error.?/... Any suggestions?
>>
>> Warm Regards,
>> Thiyagarajan B.
>>
>>
>>
>> On Tue, Jul 15, 2014 at 7:50 PM, Abhi <vyaaghrah-eng at yahoo.com> wrote:
>>
>> on free bsd if i am correct then inetd should be responsible for invoking
>> the icmp child task; looks something is wrong in the kernel.
>> Any change you did on the device?
>> You can try restarting inetd if it permits with root privilege.
>>
>>
>> regards
>> abhijeet.c
>>
>>
>>   On Tuesday, July 15, 2014 7:40 PM, thiyagarajan b <
>> bn.thiyagarajan at gmail.com> wrote:
>>
>>
>>
>> Hello,
>> I am running Junos 11.4R10 in a J2320 router and getting " Could not
>> create
>> Child process" error message whenever ping is initiated from the router.
>> Please help to resolve.
>>
>> Warm regards,
>> Thiyagarajan B.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>>
>>
>>
>>
>