[j-nsp] VC on a QFX5100 won't go away
Dave Peters - Terabit Systems
Dave at terabitsystems.com
Fri Nov 13 12:36:04 EST 2015
Excellent advice, though it doesn’t seem to be an option:
root# delete system commit ?
<[Enter]> Execute this command
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> server Commit server (batch commit)
synchronize Synchronize commit on both Routing Engines by default
| Pipe through a command
root# delete system commit
I appreciate your help, I do. Just really stumped why this thing is so stuck.
From: Plamen Stoev [mailto:plamen.stoev at gmail.com]
Sent: Friday, November 13, 2015 6:25 AM
To: Dave Peters - Terabit Systems
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] VC on a QFX5100 won't go away
Did you already try to delete this part of the configuration by doing?
# delete system commit factory-settings
On Thu, Nov 12, 2015 at 9:04 PM, Dave Peters - Terabit Systems <Dave at terabitsystems.com<mailto:Dave at terabitsystems.com>> wrote:
I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38, and I'm not having any luck. I've tried zeroizing and going into the shell to remove the files in the config/vchassis folder, but I'm having no luck. Looking at the config, I'm seeing:
root> show configuration
Which isn't on a factory default system, but I can't seem to clear that portion of the configuration, and I when I delete the .conf files from the shell, the commit/factory-settings/reset-vc stuff pops up all over again.
This is probably a really simple thing, but I'm not getting it. Can anyone help?
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
More information about the juniper-nsp