[j-nsp] VC on a QFX5100 won't go away

[Michael Loftis]

Oh also... request virtual-chassis recycle member-id N for old member IDs

On Fri, Nov 13, 2015 at 10:08 AM, Michael Loftis <mloftis at wgops.com> wrote:
> It might be it's in split mode?  request virtual-chassis reactivate ?
> It's odd that it shows itself as a linecard but also master role.  The
> other thing you could do is maybe explicitly set it as a routing
> engine?  in config set virtual-chassis member 0 serial-number XXX role
> routing-engine
>
> Whatever is going on is just software having to do with it previously
> being in a line card role.
>
> On Fri, Nov 13, 2015 at 9:38 AM, Dave Peters - Terabit Systems
> <Dave at terabitsystems.com> wrote:
>> That's another weird part. It's not connected to anything, and there's no vc-port recognized:
>>
>> root> show virtual-chassis
>>
>> Virtual Chassis ID: 1517.c443.48e0
>> Virtual Chassis Mode: Enabled
>>                                                 Mstr           Mixed Route Neigh
>> bor List
>> Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  I
>> nterface
>> 0 (FPC 0)  Prsnt    TR0214440089 qfx5100-48c-6q 128   Master*      N  VC
>>
>> Member ID for next new member: 1 (FPC 1)
>>
>> {linecard:0}
>> root> show virtual-chassis vc-port
>> fpc0:
>> --------------------------------------------------------------------------
>>
>> {linecard:0}
>> root>
>>
>> I think I've got a lemon, here, but as always, I really appreciate everyone's input.
>>
>> Thanks much.
>>
>> --Dave Peters
>>
>> -----Original Message-----
>> From: Alexandre Guimaraes [mailto:alexandre.guimaraes at ascenty.com]
>> Sent: Friday, November 13, 2015 8:22 AM
>> To: Dave Peters - Terabit Systems; juniper-nsp at puck.nether.net
>> Subject: RES: VC on a QFX5100 won't go away
>>
>>> show virtual-chassis
>>
>> Preprovisioned Virtual Chassis
>> Virtual Chassis ID: cf12.a99f.e63b
>> Virtual Chassis Mode: Enabled
>>                                                 Mstr           Mixed Route Neighbor List
>> Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  Interface
>> 0 (FPC 0)  Prsnt    TA3714071234 qfx5100-48s-6q 129   Master*      N  VC   2  vcp-255/0/50
>>                                                                                                                  1  vcp-255/0/51
>> 1 (FPC 1)  Prsnt    TA3714141234 qfx5100-48s-6q 129   Backup       N  VC   0  vcp-255/0/50
>>                                                                                                                  2  vcp-255/0/51
>> 2 (FPC 2)  Prsnt    TA3714141234 qfx5100-48s-6q   0   Linecard     N  VC   1  vcp-255/0/50
>>                                                                                         0  vcp-255/0/51
>>
>>
>> See vcp-255/0/51 ports:
>>
>>> show virtual-chassis vc-port
>> fpc0:
>> --------------------------------------------------------------------------
>> Interface   Type              Trunk  Status       Speed        Neighbor
>> or                             ID                 (mbps)       ID  Interface
>> PIC / Port
>> 0/50        Configured         -1    Up           40000        2   vcp-255/0/51
>> 0/51        Configured         -1    Up           40000        1   vcp-255/0/50
>>
>> fpc1:
>> --------------------------------------------------------------------------
>> Interface   Type              Trunk  Status       Speed        Neighbor
>> or                             ID                 (mbps)       ID  Interface
>> PIC / Port
>> 0/50        Configured         -1    Up           40000        0   vcp-255/0/51
>> 0/51        Configured         -1    Up           40000        2   vcp-255/0/50
>>
>> fpc2:
>> --------------------------------------------------------------------------
>> Interface   Type              Trunk  Status       Speed        Neighbor
>> or                             ID                 (mbps)       ID  Interface
>> PIC / Port
>> 0/50        Configured         -1    Up           40000        1   vcp-255/0/51
>> 0/51        Configured         -1    Up           40000        0   vcp-255/0/50
>>
>>
>> So:
>>
>> request virtual-chassis vc-port delete pic-slot X port Y member   Z
>>
>>
>>
>>
>>
>>
>>
>> -----Mensagem original-----
>> De: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] Em nome de Dave Peters - Terabit Systems Enviada em: quinta-feira, 12 de novembro de 2015 18:05
>> Para: juniper-nsp at puck.nether.net
>> Assunto: [j-nsp] VC on a QFX5100 won't go away
>>
>> Hi all--
>>
>> I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38, and I'm not having any luck. I've tried zeroizing and going into the shell to remove the files in the config/vchassis folder, but I'm having no luck.  Looking at the config, I'm seeing:
>>
>> root> show configuration
>>
>> <snip>
>> commit {
>>         factory-settings {
>>             reset-virtual-chassis-configuration;
>>             reset-chassis-lcd-menu;
>> <snip>
>>
>> root>
>>
>> Which isn't on a factory default system, but I can't seem to clear that portion of the configuration, and I when I delete the .conf files from the shell, the commit/factory-settings/reset-vc stuff pops up all over again.
>>
>> This is probably a really simple thing, but I'm not getting it. Can anyone help?
>>
>> Thanks much.
>>
>> --Dave Peters
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
> --
>
> "Genius might be described as a supreme capacity for getting its possessors
> into trouble of all kinds."
> -- Samuel Butler



-- 

"Genius might be described as a supreme capacity for getting its possessors
into trouble of all kinds."
-- Samuel Butler