[j-nsp] EX CVID untagged

[Andrew Thrift]

Thanks Dave.

It looks like we can do this on EX, but we will need to upgrade to
13.2X50-D15 or higher.



On Thu, Nov 19, 2015 at 1:05 AM, Dave Bell <me at geordish.org> wrote:
> Hi Andrew,
>
> To be clear, you want untagged frames to be double tagged on ingress
> on a specific port?
>
> This is possible on the MX, I'm unsure if it is on the EX though. You
> want to look at vlan rewrite.
> interface ge-0/0/0 {
>  encapsulation flexible-ethernet-services;
>  flexible-vlan-tagging;
>  unit 0 {
>     input-vlan-map {
>     push-push;
>     inner-vlan-id 901;
>     vlan-id 101;
>   }
>   output-vlan-map {
>     pop-pop;
>   }
> }
>
> This may work for you. You may also need to set the tpid.
>
> Regards,
> Dave
>
> On 17 November 2015 at 22:47, Andrew Thrift <andrew at networklabs.co.nz> wrote:
>> Hello,
>>
>> We have EX switches and are successfully carrying QinQ frames across
>> the switches.
>>
>> Recently we have had the requirement to operate a number of CVID's as
>> untagged interfaces on the EX switches, but so far have not found a
>> clear answer on if this is possible, or how to do it.
>>
>> e.g. SVID of 101, CVID of 901.   SVID/CVID 101/901 is untagged on port ge-0/0/1
>>
>> Is this possible ?  and how might we go about achieving it ?
>>
>>
>>
>> Thanks,
>>
>>
>>
>>
>> Andrew
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp