[j-nsp] Static route with tracking

Fabien Leboedec fleboedec at afone.com
Mon Oct 12 05:27:46 EDT 2015


I use the MX480 router, unfortunately i can't use IP-monitoring...


Fabien Le Boëdec 

>----- Mail original -----
>De: "Dave Bell" <me at geordish.org>
>À: "Fabien Leboedec" <fleboedec at afone.com>
>Cc: juniper-nsp at puck.nether.net
>Envoyé: Lundi 12 Octobre 2015 10:56:11
>Objet: Re: [j-nsp] Static route with tracking

>Hi Fabien,

>It depends on the platform you are using. If you are using the SRX you
>can use IP monitoring

>I'm not aware of any other method outside of EventScript.


On 12 October 2015 at 08:28, Fabien Leboedec <fleboedec at afone.com> wrote:
> Hi everybody,
> I need your help to know if it's possible to set an static route with tracking (like dvsr on Redback or IP SLA + tracking on Cisco) on MX480 (Junos V13.3R7.4)?
> I want to install in the forwarding table and propagate one static route in iBGP only if the IP of Gateway if reachable.
> It's possible to do this in very simple manner without Eventscript?
> Thanks you to your answers
> Regards,
> Fabien Le Boëdec
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list