[j-nsp] Static route with tracking

[Dave Bell]

Hi Fabien,

It depends on the platform you are using. If you are using the SRX you
can use IP monitoring
https://www.juniper.net/techpubs/en_US/junos12.1x44/topics/example/ip-monitoring-security-configuring.html

I'm not aware of any other method outside of EventScript.

Regards,
Dave

On 12 October 2015 at 08:28, Fabien Leboedec <fleboedec at afone.com> wrote:
> Hi everybody,
>
> I need your help to know if it's possible to set an static route with tracking (like dvsr on Redback or IP SLA + tracking on Cisco) on MX480 (Junos V13.3R7.4)?
>
> I want to install in the forwarding table and propagate one static route in iBGP only if the IP of Gateway if reachable.
>
> It's possible to do this in very simple manner without Eventscript?
>
> Thanks you to your answers
> Regards,
>
>
>
> Fabien Le Boëdec
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp