[j-nsp] Cheaper way to have 2x100G and 16x10G wire-speed in MX480

[Phil Bedard]

The 16x10G cards are not going to be full line rate at all packet sizes and depending on destinations can't push full line rate due to limitations to fabric BW on each PFE. 

Phil

-----Original Message-----
From: "Robert Hass" <robhass at gmail.com>
Sent: ‎9/‎26/‎2015 8:42 AM
To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Subject: [j-nsp] Cheaper way to have 2x100G and 16x10G wire-speed in MX480

Hi
What is cheapest way to choose proper MPC/MICs to have 2x100G and 16x10G
all wire-speed plus possibility to extend my configuration to total 32x10G
and 4x100G ?

Is it possible to have 200Gbps (400G in both directions) per slot in cast
of malfunction of one fabric card ?

What you can suggest ?

Rob
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp