[j-nsp] Cheaper way to have 2x100G and 16x10G wire-speed in MX480

[joel jaeggli]

On 9/27/15 12:01 PM, Phil Bedard wrote:
> The 16x10G cards are not going to be full line rate at all packet
> sizes and depending on destinations can't push full line rate due to
> limitations to fabric BW on each PFE.

afaik the 16 x 10 fixed mpc was 1.2:1 oversubscribed.

> Phil
> 
> -----Original Message----- From: "Robert Hass" <robhass at gmail.com> 
> Sent: ‎9/‎26/‎2015 8:42 AM To: "juniper-nsp at puck.nether.net"
> <juniper-nsp at puck.nether.net> Subject: [j-nsp] Cheaper way to have
> 2x100G and 16x10G wire-speed in MX480
> 
> Hi What is cheapest way to choose proper MPC/MICs to have 2x100G and
> 16x10G all wire-speed plus possibility to extend my configuration to
> total 32x10G and 4x100G ?
> 
> Is it possible to have 200Gbps (400G in both directions) per slot in
> cast of malfunction of one fabric card ?
> 
> What you can suggest ?
> 
> Rob _______________________________________________ juniper-nsp
> mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp 
> _______________________________________________ juniper-nsp mailing
> list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 229 bytes
Desc: OpenPGP digital signature
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20150927/0081d683/attachment.sig>