[j-nsp] Questions about T640

Alireza Soltanian soltanian at gmail.com
Mon Apr 11 00:55:01 EDT 2016


Hi everybody

We are going to change our M320 router with T640. There are some concerns
about supported features on T640. We need to have following features on this
router:

 

1-      GRE Tunnels

2-      GRE Keepalive (OAM)

3-      802.1q over 802.1ad

4-      MPLS TE

5-      ATOM VLAN re-write

 

We need to handle up to 80Gbps of traffic. Here is the setup:

For Module setup we are going to use following FPC:

-          T640-FPC3-ES

For Physical connections we are going to use following PICs:

1-      PC-1XGE-TYPE3-XFP-IQ2

2-      PC-1XGE-XENPAK

For GRE tunnels we are going to use following PICs:

PC-Tunnel

For Routing Engine following item is considered:

-          RE- A-2000-4096-BB

For SIB:

-          SIB-I-T640-B

For Control Board: 

-          CB-L-T

And for Connector interface panel:

-          CIP-L-T640-S

Is there anybody here who can guide me is this setup good or not and can I
have the mentioned feature with T640? Also is there any note about required
JunOS version of this setup?

 

Thank you

 

 



More information about the juniper-nsp mailing list