[j-nsp] ACX5048 - vlan-map conflict with routing-instance with vlan-id tags

[Aaron]

Hmmmm, ok then, I wonder if anyone knows if there's a way to configure a vlan list with tags 10 and 17 into the same unit number ?  that way when I put that unit/logical interface into a vlan (aka BD) then it's only one unit/logical interface.

Aaron

-----Original Message-----
From: dverlouw at gmail.com [mailto:dverlouw at gmail.com] On Behalf Of Daniel Verlouw
Sent: Friday, April 22, 2016 12:34 PM
To: Aaron <aaron1 at gvtc.com>
Cc: juniper-nsp List <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] ACX5048 - vlan-map conflict with routing-instance with vlan-id tags

Hi Aaron,

On Thu, Apr 21, 2016 at 10:20 PM, Aaron <aaron1 at gvtc.com> wrote:
> agould at eng-lab-5048-1# commit
> [edit vlans vlan10]
>   'interface ge-0/0/38.17'
>     l2ald ACX: On a bd, for each ifd only one ifl can be added [edit 
> vlans]
>   Failed to parse vlan hierarchy completely
> error: configuration check-out failed

that's a different issue from the vlan-swap problem you had, and is actually a known limitation described in the manual/rel.notes;

"A bridge domain cannot have two or more logical interfaces that belong to the same physical interface."

   --Daniel.