[j-nsp] Full routes on MX5

[Tim St. Pierre]

I have one in a very similar configuration, with three full feeds in 
IPv4 and IPv6.

It generally works just fine, but convergence time is slow.  It can take 
two minutes to process the full feed, and if you restart the box, it 
will take even longer.

It's a good machine for a small ISP though.

-Tim



On 2016-04-26 08:33 AM, sthaug at nethelp.no wrote:
>> Has anyone ever tried full IPv4 routes on a MX5? We have 3 peers + iBGP. We
>> were told in the past that when a BGP session drops the MX5 could lock up
>> for up to 2 minutes.
> We have MX80s (essentially the same box) with full Internet routing
> table. It works but is not recommended: RE memory (2 GB) is rather
> limited, and convergence time is not great.
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
Tim St. Pierre
System Operator
Communicate Freely
www.communicatefreely.net
289-225-1220 x5101