[j-nsp] MPC-3D-16XGE-SFPP at 1G speed

[Aaron]

Yep, that's what I do with my SFP+ (1 gig / 10 gig) capable ports in my
ACX5048... if I slide in a 10 gig optic I config xe-0/0/38... if I slide in
a 1 gig optic I config ge-0/0/38

Aaron

p.s. but I wonder what those (6) 40 gig ports will be called with a 40 gig
qsfp ??  xe ?  or something else ?

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
Dave Bell
Sent: Tuesday, April 26, 2016 2:31 PM
To: Dave Peters - Terabit Systems <Dave at terabitsystems.com>
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MPC-3D-16XGE-SFPP at 1G speed

I have no idea if you can use 1G optics in this card, but if you can, you
likely want to configure the interface as ge-0/0/0, instead of xe. This is
how it works on the EX4200 with the SFP+ module.

Regards,
Dave

On 26 April 2016 at 20:23, Dave Peters - Terabit Systems <
Dave at terabitsystems.com> wrote:

> Hi all--
>
> Stupid question, here. Can the MPC-3D-16XGE-SFPP run with 1G optics (e.g.
> EX-SFP-1GE-SX), and if so, is there a specific port setting I need to 
> commit? I'm running an MX480 with 13.3R8.7, and Uncle Google hasn't 
> been too useful, yet.
>
> I tried:
>
> set interfaces xe-0/0/0 auto-negotiate
>
> inserted the EX-SFP-1GE-SX connected to an outside 1G port, no lights, 
> no joy.
>
> Any help is appreciated.
>
> Thanks much.
>
> --Dave Peters
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp